One Armed Rear

Allows wheel removal for all Ducatis, Hondas, MV Agustas and Triumphs with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete but pins are interchangeable to fit other bikes.
	(Scroll down to see full list)
	Hawk and VFR	Complete ~~$144.95~~ $139.99 P/N: F0004-000	Ducati (Except 1098)	Complete ~~$144.95~~ $139.99 P/N: F0005-000
	Allows wheel removal for bikes with single-sided swingarms including Honda Hawk and VFR. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes.		The Ducati One Armed Rear allows wheel removal for all Ducatis with single-sided swingarms except 1098. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Ducati 998/996/916/748, Monster S4R, Monster S2R, Multistrada 1000, M900E. Does not fit Ducati 1098 - See our 1098 stand in this section.
	Honda Exotics	Complete ~~$144.95~~ $139.99 P/N: F0006-000	Honda RS250	Complete ~~$144.95~~ $139.99 P/N: F0014-000
	Allows wheel removal for Hondas with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits RC30/45, NC30/35.		Allows wheel removal for Honda RS250 with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete with pin. Fits Honda RS250. Will not work on other bikes since it is made to work on right side of bike only.
	Triumph	Complete ~~$144.95~~ $139.99 P/N: F0016-000	Ducati 1098/MV Agusta	Complete ~~$149.95~~ $139.99 P/N: F0027-000
	Allows wheel removal for Triumphs with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes.		Allows wheel removal for Ducati 1098s & MV Agustas with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Ducati 1098 & MV Agusta.
	Ducati 1098/MV Agusta Reversible	Complete ~~$189.95~~ $179.99 P/N: F0027B-000	Ducati (Except 1098) Reversible	Complete ~~$179.95~~ $169.99 P/N: F0029-000
	For Ducati 1098 & MV Agustas with single-sided swingarms. When installed on the left side, it allows wheel removal; when installed on the right side, it allows easy sprocket removal. On left side, handle is forward; on right side handle is behind bike. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Ducati 1098 & MV Agusta LH and RH, On some models the 1098/MV pin will fit both sides of the bike. On other models the 1098L pin will fit the left side, and the 1098/MV pin will fit the right side. Stand is sold complete with both pins.		For Ducatis with single-sided swingarms, except 1098. When installed on the left side, it allows wheel removal; when installed on the right side, it allows easy sprocket removal. On the left side, handle is forward; on the right side, handle is behind bike. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Ducati 998/996/916/748, Monster S4R, Monster S2R, Multistradas, M900E. LH and RH. Does not fit Ducati 1098
	Honda NSR250	Complete ~~$144.95~~ $139.99 P/N: F0032-000	Triumph Reversible	Complete ~~$179.95~~ $169.99 P/N: F0033-000
	Allows wheel removal for single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Honda NSR250. Same pin as RS250.		For Triumphs with single-sided swingarms. When installed on the left side, it allows wheel removal; when installed on the right side, it allows easy sprocket removal. On the left side, handle is forward; on the right side, handle is behind bike. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Triumphs with single-sided swingarm, LH and RH.
	BMW K1200S/R	Complete ~~$164.95~~ $149.99 P/N: F0056A-000	BMW K1200S/R Forward Handle	Complete ~~$179.95~~ $169.99 P/N: F0056-000
	Allows wheel removal for BMW K1200S/R with single-sided swingarms. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes.		Rear stand for 2005 BMW K1200S and K1200R with the new single-sided swingarm. It allows rear wheel removal. The forward handle layout lets you hold the left handlebar of the bike to operate. It is space-saving and leaves no trip hazard behind the bike. The ball bearing head allows you to spin the wheel while the bike is on the stand for easy wheel cleaning.
	BMW R1200 Forward Handle	Complete ~~$179.95~~ $169.99 P/N: F0056C-000	BMW R1200S	Complete ~~$164.95~~ $149.99 P/N: F0056B-000
	Rear stand for BMW R1200S with the new single-sided swingarm. It allows rear wheel removal. The forward handle layout lets you hold the right handlebar of the bike to operate. It is space-saving and leaves no trip hazard behind the bike. The ball bearing head allows you to spin the wheel while the bike is on the stand for easy wheel cleaning. Right Side Insert Only		Allows wheel removal for BMW R1200S with single-sided swingarm. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Right Side Insert Only
	Ducati 1098 One Armed Rear	Complete ~~$149.95~~ $139.99 P/N: F0027C-000
	Allows wheel removal for Ducati 1098 models with the smaller hole in the left side of the axle (approx. 41mm) It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes. Fits Ducati 1098.