The most inexpensive highmount set up for the CBR929/954 that retains the rear footpegs. You can choose between the 1/2 or 3/4 System. Both set-ups look the same and perform the same, the difference is the simple cut that you need to make with the 1/2 system. The 3/4 system is a 4-2-1 that bolts onto the back of the HTEV valve. These two choices will give you a great sound and power gain without losing the smoothness. FULL SYSTEM NOT AVAILABLE. Click HERE to view difference between 1/2 and 3/4 system.

The most inexpensive highmount set up for the CBR929/954 that retains the rear footpegs. You can choose between the 1/2 or 3/4 System. Both set-ups look the same and perform the same, the difference is the simple cut that you need to make with the 1/2 system. The 3/4 system is a 4-2-1 that bolts onto the back of the HTEV valve. These two choices will give you a great sound and power gain without losing the smoothness. FULL SYSTEM NOT AVAILABLE Click HERE to view difference between 1/2 and 3/4 system.

The most inexpensive highmount set up for the CBR929/954 that retains the rear footpegs. You can choose between the 1/2 or 3/4 System. Both set-ups look the same and perform the same, the difference is the simple cut that you need to make with the 1/2 system. The 3/4 system is a 4-2-1 that bolts onto the back of the HTEV valve. These two choices will give you a great sound and power gain without losing the smoothness. FULL SYSTEM NOT AVAILABLE Click HERE to view difference between 1/2 and 3/4 system.

With the SB2 Standard Bolt on slip-on, you will simply remove your stock canister at the flange and replace it with the Devil slip-on. Much improved throttle response and the great DEVIL sound. Click HERE to view difference between 1/2 and 3/4 system.

The most inexpensive highmount set up for the CBR929/954 that retains the rear footpegs. You can choose between the 1/2 or 3/4 System. Both set-ups look the same and perform the same, the difference is the simple cut that you need to make with the 1/2 system. The 3/4 system is a 4-2-1 that bolts onto the back of the HTEV valve. These two choices will give you a great sound and power gain without losing the smoothness. FULL SYSTEM NOT AVAILABLE. Click HERE to view difference between 1/2 and 3/4 system.

The All new RACE REPLICA was developed from racetrack Technology and now made available for you. This is a 100% titanium oval canister with a Titanium connecting pipe. Comes complete with a Carbon fiber collar and mounts higher than the standard position. This slip-on weighs in at 3.3 pounds. Click HERE to view difference between 1/2 and 3/4 system.